Perforation Knowledge-Plastc Sheet Knowledge-CN Perforated Plastics Co.,Ltd.

CN Perforated Plastics Co.,Ltd.

Home> > Service> Plastc Sheet Knowledge
Product Index
Select related products:
Perforated PP Sheet
Perforated Plastic Panel and sheet
Perforated Plastic Sterilization Sheet for Autoclaves
White PP Perforated Plastic Sheet to your size
Bespoke Perforated Plastic Sheet in various colors
Cut to size perforated plastic sheet
Perforated Plastic Ceiling Panels
White perforated plastic sheet in cut size
1-10mm perforated plastic sheet
Customed Perforated Plastic Sheet
Perforated Plastic Sheet
Perforated PVC Sheet
Perforated Grey PVC Sheet
2mm thick 3.5X20mm slotted hole perforated plastic PVC sheet
Perforated Plastic Gutter Guard
Slotted Perforated PVC Sheet
Perforated Gray PVC sheet
Perforated PVC sheet for ceiling
Gray Perforated PVC Sheet
Transparent Perforated PVC Sheet
Clear Perforated PVC Sheets
Blue Perforated PVC Sheet
Perforated PE Sheet
Perforated PE sheet
Perforated HDPE Sheet
Perforated plastic sheets for layer pads for sterilization
Perforated plastic sterilization layer pads
Perforated layer pads
Perforated Plastic PP PE and PVC Sheet
1 to 15mm white perforated HDPE sheet
Perforated Plastic Shelf
Perforated HDPE
Perforated Metal Sheet
Superior Perforated Sheet
Perforated Metal Sheet for Chairs and Tables
Finshed Products
Perforated rain gutter guards in plastic and aluminum sheet
Plastic and metal leaf guard
Gutter Guards in perforated plastic and aluminum sheet
Eaves Ventilation Grid
Gutter Guards Made in Perforated Sheet and Wire Mesh
Rain Gutter Screens
Attic Vents
Soffit Undereave Vents
Perforated Aluminum Soffit Vent for Attic
Perforated Eaves Grid for Roof Vetilation
Other Products
Plastic and Aluminum Gutter Guards
Rain Gutter Guards
Eaves ventilation Strip Grid
Perforated Continuous Soffit Vent
Perforated Plastic Rolls in 0.5mm to 1.5mm
Perforated Plastic Water Filters
Porous Plastic Water Filters
Porous Plastic Sheet and Disc
Sintered Porous Plastic Sheet
Sintering Porous Plastic Sheet
Perforation Knowledge

Perforation is to punch a series of small holes in a substrate such as metal sheet,plastic sheet,leather or paper.There is usually more than one perforation in an organized fashion, where all of the holes are called a perforation. The process of creating perforations is called perforating.

Nowadays,CNC perforating machine are widely used for perforation.Die and punch sets can be used for perforating.The process is the most common for metalworking and plasticworking.The workpiece is sheared by pressing of the punching machine,the punch through the workpiece and into the die. The middle section of the workpiece is scrap.The punch and die are shaped to produce the desired shaped hole.The clearance (the distance between the outside circumference of the punch and the inner circumference of the die) must be properly maintained to ensure a clean cut. Burrs are produced on the side of the workpiece that is against the die.

There are some terms for perforation as follows:

1.Material Thickness: The thickness of plastic sheet will affect the hole diameter and pitch,normally,the hole size shoud not be smaller than the thickness of the plastic sheet,the same as metal sheet.
2.Hole shape and pattern:Round holes are the most popular,which covers straight hole pattern and staggered pitch hole pattern such as 60 degree,45 degree staggered round hole pattern.
3.Hole diameter:As mentioned above,the hole diameter can be affected by the thickness of the plastic sheet and metal sheet.The thickness of the sheet and the hole size should not go below 1-to-1 ratio.Stay at 2-to-1 or larger if possible.
4.Center distance:It controls feed rate and thereby the production rate.If possible, choose a pattern with longer center distance.The thicker the plastic sheet is,the longer the center distance should be.
5.Open areas: It is decided by the hole size and center distance.
6.Margins:Margins mean the hole-free area,normally,we will keep side margins to a minimun to reduce distortion. Use standard Unfinished End Margins if you can.See Unfinished End Margins vs. Finished End Margins here.

Micro Perforation isnt defined in the dictionaries I have. Micro however, is defined as very small, which leaves us with a definition of micro perforation as a series of very small holes in a substrate. Hows that for a very subjective and relative term?! In the packaging industry, which deals extensively with a nearly infinite variety of perforating rules, a micro perforation has come to be known as a perforation in the 15 to 20 teeth-per-inch range, or higher.

 

Copyright CN Perforated Plastics Co.,Ltd. About us    |     News Center    |     Product    |     FAQ    |     Service    |     Gallery    |    
  E-mail:norsouth@189.cn  Tel: 0086-186-3305-6893